Descripción

Signal converter – converts, multiplies, and splits output signals.The SK 1SC-1D signal converter converts, multiplies, and divides output signals from sine-cosine encoders andcomparable measuring systems to produce incremental pulse signals. A corresponding number of output pulses is interpolated from each period of the incoming sine-cosine voltage signal, incorporating an adjustable multiplier. If required, these can also be divided before output. All settings are configured using an 8-pin DIL switch.The module is quickly and easily mounted in the control cabinet on a standard DIN rail.
Mechanical
Dimension40 mm x 79 mm x 91 mm
Working temperature0 °C ... 45 °C
Protection levelIP20
ConnectionsScrew terminalsSub-D connector
Electrical
Input interfacesSinCos
Output interfacesTTL / RS422HTL
Coding inputsSin+, Sin-, Cos+, Cos-, Ref+, Ref-, VM
Coding outputsA, B, 0A, A|, B, B|, 0, 0|
Input frequency400.000 Hz
Output frequency4.000.000 Hz
Supply voltage18...30 V DC
Characteristics
  • Converts sinusoidal signals with standard level 1 Vpp intoincremental square signals.
  • Outputs A, /A, B, /B, 0, /0 (RS422 / TTL) and A, B, 0 (18 ... 30 V HTL).
  • Multiplier for interpolations adjustable in the range1 : 5 to 1 : 50.
  • Divider adjustable in the range 1 : 1 to 1 : 128 for reducing theoutput frequency.
  • Sine input frequency 0 to 400 kHz.
  • Square output frequency up to 4 MHz.
  • Switchable glitch filter.
  • Comprehensive features such as control input for error triggering,„Error“ control output.
Benefits
  • Integration of SinCos signals as square signals in the PLC.
  • Interpolation of SinCos signals possible.
  • Usable in combination with encoders and sensors.
  • Wide range of converter control possibilities (HTL, TTL / RS422).
''