Descripción

Position display with separate tachometer, scalable.The Codix 52P is a voltage supplied pulse/ counter position indicator with 4 counter input types and separate tachometer. With separate input, for fast and slow counting pulses, with 6-digit LED display for NPN, PNP input signals.

Mechanical
ModelDual-function device electronic
FeaturesPulse counterPosition displays without limitsTachometer without limitsDual-function display
Dimension 148 x 24 mm | 45 x 22 mm
Protection levelIP65
Working temperature-20 °C ... +65 °C
Weight50 g
Resetelectronic

(1) Installation | Front panel

Electrical
Supply voltage10...30 V DC
Signal inputNPNPNP

Powerful

  • Fast counter and frequency input, input frequency max. 30 kHz
  • Robust housing - IP65 protection
  • Very bright LED display, 8 mm high, 6 digits
  • Exact and highly accurate frequency measurement method (HRA-High Rate Accuracy System) Frequencies up to 38 Hz are evaluated by a period measurement. Frequencies > 38 Hz are evaluated via a special gate time measurement. Despite a short gate time, a very high accuracy of < 0.1% is achieved. The measurement result is available after max. 50 ms.
  • Short start-up time - Detects incoming pulses already after 16 ms after switching on the power supply => no pulse loss with simultaneous motor start

User-friendly and universal

  • Large keys (can also be operated with gloves)
  • Programming

- Simple and uniform programming and operation through plain text programming- Access to programming also during operation with safety query- Display switching by pressing the right button

  • Individually adjustable scaling

Multiplication and division factor (0.0001 to 99.9999) to display the corresponding units in e.g. position in 1/10 mm and speed in rpm/.

  • Separate factors and inputs for frequency and pulse counting
  • 4 different counter input types for the position display:

2-channel input for acquisition of counting direction, differential or addition mode, phase discriminator with single, double, or quadruple evaluation. 1 separate input for speed and speed, display in 1/min or 1/sec

  • Inputs: As an alternative to the HTL inputs, devices with 4 to 30 V DC input level available for use as parallel display to PLC.
''